SDU Catastrophe Response logo
How To Choose a Restoration Company in Colorado Springs (Without Getting Burned)

How To Choose a Restoration Company in Colorado Springs (Without Getting Burned)

By IICRC Certified Firm, IICRC WRT (Water), IICRC ASD (Structural Drying)

Why This Decision Is Hard Right Now

You’re probably reading this because water showed up where it shouldn’t, smoke settled into every fabric in the house, or you found something growing in a corner you’d rather not think about. The honest answer to “how do I pick a restoration company without getting burned” is this: verify three things before anyone touches your property. Confirm they carry IICRC certification for the specific type of loss you have, get a written scope of work before any demolition starts, and ask who is billing your insurance carrier and how. Skip any of those three and you’re exposed to overcharging, incomplete drying, or a mold problem that resurfaces in 60 days.

The Situation: Why Restoration Is an Easy Industry to Get Burned In

Water, fire, and mold losses put homeowners in a bad negotiating position. You’re often standing in a wet basement at 9 p.m. with a phone in hand, and the first company that picks up gets the job. That urgency is exactly what a handful of bad actors in every market count on. Colorado Springs has its own version of this problem: older homes near downtown and the Old North End with original plumbing runs that fail without warning, newer construction on the east side with slab leaks that go undetected for weeks, and a hail season that generates a flood of storm-damage calls every spring, which is also when out-of-town “storm chaser” crews show up, do rushed work, and leave town before callbacks happen.

The damage itself also hides more than it shows. Water that soaked drywall on a Tuesday can look dry to the touch by Friday while the framing behind it stays saturated. Smoke odor can seem to fade from a room while residue is still bonded to porous surfaces like fabric and ceiling texture. None of this is visible to an untrained eye, which is exactly why the company you hire matters more than the price they quote.

What to Check Before You Sign Anything

  • Certification, not just a license plate on a van. Ask specifically whether the technicians on-site hold IICRC credentials for your type of loss: WRT (Water Restoration Technician) for a leak or flood, FSRT (Fire & Smoke Restoration) for a fire loss, AMRT (Applied Microbial Remediation) for mold. A company can be a legitimate business and still send someone undertrained to your specific job.
  • A written scope before demolition. Any reputable crew should document moisture readings, photograph affected materials, and give you a scope of work in writing before they start tearing out drywall or flooring. If someone wants to start demo before documenting anything, that’s a red flag for insurance disputes later.
  • Clear answers on insurance billing. Ask directly: do they bill the carrier, or do you pay out of pocket and submit for reimbursement? Both models exist, but you need to know which one you’re agreeing to before work starts, not after.
  • Drying standards, not guesswork. Ask how they’ll verify the structure is dry before they call the job done. The industry standard is IICRC S500, which relies on moisture meters and documented readings, not a visual check or a few days of fans running.
  • A local address and a callback history. A company that’s been answering phones in Colorado Springs for years has a reputation to protect. A truck with an out-of-state plate that showed up after last week’s hailstorm does not.

What NOT to Do While You’re Deciding

Don’t sign a contract that has a blank or vague scope of work “to be determined later.” Don’t let anyone start ripping out materials before photos and moisture readings are documented, both for insurance purposes and so you have a record of what was actually damaged. Don’t assume the cheapest quote is the safest one. Incomplete drying is invisible until the mold shows up weeks later, and at that point you’re paying twice. And don’t wait on a mold concern hoping it resolves itself. Mold can begin colonizing building materials within 24 to 48 hours of a water event, so a delayed decision is itself a decision.

When to Call a Professional vs. When to Wait

Some situations genuinely allow you time to research and get a second opinion. A small, contained leak that you’ve already stopped at the source, with no standing water and no odor, is one of them. You can take a day to compare companies.

Others don’t. Call a restoration professional without delay if you have:

  • Standing water anywhere in the structure, especially in a basement
  • A ceiling stain that’s spreading or soft to the touch (a sign of active water damage above)
  • Any sewage backup, which carries contamination risk that gets worse the longer it sits
  • Visible mold growth larger than roughly a square foot
  • Fire or smoke damage, where soot and odor particles continue settling into materials the longer they’re left untreated

SDU Catastrophe Response handles water damage restoration, fire damage restoration, and mold remediation for Colorado Springs homes and commercial properties, and our technicians carry IICRC certification across water, structural drying, fire and smoke, and mold remediation disciplines. If your situation falls outside those three areas, a reputable company should tell you that plainly and point you to the right specialist rather than take the job anyway.

The Recovery Process, Realistically

Once you’ve chosen a company, the process generally moves in stages, and knowing them helps you spot a crew that’s cutting corners. First comes assessment and documentation: moisture mapping for water losses, soot and odor testing for fire losses, visual inspection and sometimes air or surface sampling for mold concerns. Next is mitigation, stopping the damage from spreading further, extracting standing water, removing unsalvageable materials, containing a mold-affected area before disturbing it. Then comes the actual drying or remediation phase, which for water losses should be verified with moisture meter readings over several days, not a single visit. Only after a structure reads dry, or a fire-damaged area is cleared of soot and odor, or a mold-affected area passes a post-remediation check, should repairs and reconstruction begin.

A company cutting corners skips straight from mitigation to repairs, patching drywall over a structure that’s still damp. That shortcut is invisible at the time and expensive six months later.

If you’re dealing with an active water, fire, or mold situation in Colorado Springs and want a second opinion before you commit to a crew, call SDU Catastrophe Response at (303) 656-9934. We’ll walk through what we’re seeing and what it should cost to fix it right, whether or not you end up hiring us.

Frequently Asked Questions

How much should restoration work cost in Colorado Springs?
Costs vary widely based on the extent of damage, materials affected, and whether mold or structural drying is involved, so be cautious of anyone quoting a firm number over the phone before inspecting the property. A legitimate company will document the damage first and provide a written scope before giving you a real estimate. If a quote seems far below others you've gathered, ask what's being left out, like moisture verification or disposal of contaminated materials.
Will my homeowner's insurance cover restoration work?
Most policies cover sudden and accidental water damage, like a burst pipe, but typically exclude damage from long-term neglect or gradual leaks you should have caught earlier. Fire damage is usually covered under standard policies. Mold coverage is more limited and often depends on whether the moisture source was a covered event, so it's worth reading your policy's mold exclusions before you assume everything is covered.
How do I know if a company is padding the insurance claim?
Ask for an itemized scope of work tied to actual moisture readings, photos, or documented damage, not a lump-sum number. If a company suggests inflating the claim or adding work unrelated to the actual loss, that's a legal and ethical problem for you as the policyholder, not just them. A company that bills insurers directly and routinely should be comfortable walking you through exactly what's being submitted and why.
Can I just dry things out myself with fans and skip hiring someone?
For a very small, contained spill that you caught immediately, fans and a dehumidifier might be enough. But once water has soaked into drywall, subfloor, or framing, surface drying won't reach the moisture trapped inside those materials, and that trapped moisture is exactly what leads to mold within a couple of days. If there's any uncertainty about how far the water traveled, a moisture inspection is worth the call even if you end up handling some of the cleanup yourself.

Need help with a similar situation?

Call us 24/7. We answer the phone.

Call Now: (303) 656-9934